Insulation plays a critical role in your home’s energy efficiency, keeping it warm during the winter and cool during the summer. When properly installed, a fresh layer of insulation can significantly cut down your heating and cooling bills and help keep pests out of the attic.

The type and amount of attic insulation you need depends on a number of factors, including the climate where you live and the age of your house. The “R” value of an insulation, which measures its resistance to the conductive flow of heat, is also important. The higher the R-value, the better the insulation.

Loose-fill cellulose and fiberglass are the most popular options for attic insulation. These are inexpensive and do a good job of providing an R-value of around 3.5 per inch. The CDC recommends making sure your attic insulation is at least five to six inches thick.

Beyond the Basics: Innovative Applications of Spray Foam Insulation in Home Improvement

Another option is spray foam, which can seal air leaks and insulate at the same time. It can be quite expensive, though, and it requires professional installation. If you choose this option, be aware that the chemicals used to make the foam can irritate your skin and eyes and may cause rashes and other symptoms if they come in contact with it. In addition, the professionals who install this type of insulation must wear protective gear that includes a mask and goggles.

Be sure to identify uncovered electrical boxes and other objects before insulating an attic space. Some insulated materials can cover these items and block proper ventilation, which can allow carbon monoxide to leach into your home and cause flu-like symptoms.

Spray Pro Insulation
1155 Commerce Blvd N, Sarasota, FL 34243, United States
863-205-7111

A home that is properly insulated can significantly reduce energy bills. It also provides more comfort in the rooms below. However, many homeowners don’t realize that insulating the attic is just as important as insulating walls and floors. In fact, the attic is one of the best places to insulate a house due to its size and location.

Spray foam metal building insulation provides superior insulating capabilities that other attic insulation types cannot match. This insulation creates an airtight barrier to retain cooled or heated air, reducing the workload of your AC and heating units. It is a great solution for Charlotte residents looking to save money and increase their indoor comfort.

The 4 Types of Attic Insulation

There are four main types of attic insulation: fiberglass batt insulation, blown-in cellulose, loose-fill and polyethylene. Each has its own pros and cons.

Fiberglass batt insulation is the most popular type of attic insulation. It looks a little bit like cotton candy and clouds and has been around for decades. Its popularity has remained steady because it is affordable and effective.

Blown-in cellulose insulation is similar to fiberglass insulation, as it is also a loose form that is blown into the space between the rafters using an insulation blower. The difference is that blown-in cellulose is made from recycled paper products such as newspapers and cardboard. This is an eco-friendly option that is fire retardant because boric acid and other substances are added to it to make it flame proof.

Spray Foam Genie Charlotte
635 Atando Ave Suite I, Charlotte, NC 28206, United States
(980) 381-2055

TCS Insulation & Coatings is a spray-on insulation product that acts as both an insulator and sealant, closing the nooks and crannies in older homes, pole barns or metal buildings that let air escape and drive up energy costs. It also creates a barrier against moisture, improving indoor air quality and helping to lower carbon emissions. Find out :https://tcsolutionsusa.com/

When homeowners think of their homes, they envision warmth and safety, but often do not equate energy efficiency with their vision. TCS works with homeowners to help them realize their home vision by transforming their living spaces into quiet, cozy spaces using state-of-the-art energy saving insulation products.

TCS Insulation & Coatings: Experts in Energy Efficiency Solutions

The Apticote 300TP coating is based on Socomore TCS/PACS technology and uses no chromates, making it safer to handle than Alocrom or other chromate-free conversion coat processes. It also does not contain materials currently defined as SVHCs in EU or UK REACH legislation and so is unlikely to be under threat from future chemical regulation.

The BLUESIL TCS formulations used in textile coatings give formulators and printers a wide range of options for creating unique, high-performance, screen-printable silicone coatings that add performance features to fabrics such as waterproofing, elastomeric properties or anti-slip qualities. Whether it’s a sports or work glove, fashion accessory, medical garment, or other wearable device, these innovative silicone elastomers enhance the durability and functionality of the fabric by adding a comfortable feel, preventing moisture penetration and improving breathability. The result is a premium performance fabric that meets the highest consumer and regulatory standards.

TCS Insulation & Coatings
5558 Pine Beach Rd Unit 6 Brainerd, MN 56401
(218) 820-9340